diff --git a/.mailmap b/.mailmap
index 8049856..952e1da 100644
--- a/.mailmap
+++ b/.mailmap
@@ -42,6 +42,7 @@
 Fabio Estevam <fabio.estevam@nxp.com>
 Harini Katakam <harini.katakam@amd.com> <harini.katakam@xilinx.com>
 Harsha <harsha.harsha@amd.com> <harsha.harsha@xilinx.com>
+Heiko Stuebner <heiko.stuebner@cherry.de> <heiko.stuebner@theobroma-systems.com>
 Heinrich Schuchardt <xypron.glpk@gmx.de> <heinrich.schuchardt@canonical.com>
 Heinrich Schuchardt <xypron.glpk@gmx.de> xypron.glpk@gmx.de <xypron.glpk@gmx.de>
 Ibai Erkiaga <ibai.erkiaga-elorza@amd.com> <ibai.erkiaga-elorza@xilinx.com>
@@ -53,12 +54,14 @@
 Jagan Teki <jaganna@xilinx.com>
 Jagan Teki <jagannadh.teki@gmail.com>
 Jagan Teki <jagannadha.sutradharudu-teki@xilinx.com>
+Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de> <jakob.unterwurzacher@theobroma-systems.com>
 Jay Buddhabhatti <jay.buddhabhatti@amd.com> <jay.buddhabhatti@xilinx.com>
 Jernej Skrabec <jernej.skrabec@gmail.com> <jernej.skrabec@siol.net>
 John Linn <john.linn@amd.com> <john.linn@xilinx.com>
 Jyotheeswar Reddy Mutthareddyvari <jyotheeswar.reddy.mutthareddyvari@amd.com> <jyothee@xilinx.com>
 Jyotheeswar Reddy Mutthareddyvari <jyotheeswar.reddy.mutthareddyvari@amd.com> <jyotheeswar.reddy.mutthareddyvari@xilinx.com>
 Kalyani Akula <kalyani.akula@amd.com> <kalyani.akula@xilinx.com>
+Klaus Goger <klaus.goger@cherry.de> <klaus.goger@theobroma-systems.com>
 Masahisa Kojima <kojima.masahisa@socionext.com> <masahisa.kojima@linaro.org>
 Love Kumar <love.kumar@amd.com> <love.kumar@xilinx.com>
 Lukasz Majewski <lukma@denx.de>
@@ -88,9 +91,11 @@
 Patrice Chotard <patrice.chotard@foss.st.com> <patrice.chotard@st.com>
 Patrick Delaunay <patrick.delaunay@foss.st.com> <patrick.delaunay@st.com>
 Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
+Philipp Tomsich <philipp.tomsich@vrull.eu> <philipp.tomsich@theobroma-systems.com>
 Piyush Mehta <piyush.mehta@amd.com> <piyush.mehta@xilinx.com>
 Prabhakar Kushwaha <prabhakar@freescale.com>
 Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@amd.com> <punnaiah.choudary.kalluri@xilinx.com>
+Quentin Schulz <quentin.schulz@cherry.de> <quentin.schulz@theobroma-systems.com>
 Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> <radhey.shyam.pandey@xilinx.com>
 Rajeshwari Shinde <rajeshwari.s@samsung.com>
 Raju Kumar Pothuraju <rajukumar.pothuraju@amd.com> <raju.kumar-pothuraju@xilinx.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c81dcd0..8fb6a8a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1026,9 +1026,6 @@
 
 dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
 
-dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
-	omap3-igep0020.dtb
-
 dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \
 	omap4-panda.dtb \
 	omap4-panda-es.dtb
diff --git a/arch/arm/dts/omap3-igep.dtsi b/arch/arm/dts/omap3-igep.dtsi
deleted file mode 100644
index 2192026..0000000
--- a/arch/arm/dts/omap3-igep.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common device tree for IGEP boards based on AM/DM37x
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "igep2";
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	vdd33: regulator-vdd33 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33";
-		regulator-always-on;
-	};
-
-};
-
-&omap3_pmx_core {
-	gpmc_pins: pinmux_gpmc_pins {
-		pinctrl-single,pins = <
-			/* OneNAND seems to require PIN_INPUT on clock. */
-                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
-		>;
-	};
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29c4g96maz";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		status = "okay";
-	};
-
-	onenand@0,0 {
-		compatible = "ti,omap2-onenand";
-		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
-
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-wrap;
-		gpmc,burst-read;
-		gpmc,burst-write;
-		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
-		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <96>;
-		gpmc,cs-wr-off-ns = <96>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <18>;
-		gpmc,oe-off-ns = <96>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <96>;
-		gpmc,rd-cycle-ns = <114>;
-		gpmc,wr-cycle-ns = <114>;
-		gpmc,access-ns = <90>;
-		gpmc,page-burst-access-ns = <12>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <6>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <90>;
-		gpmc,sync-clk-ps = <12000>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		status = "disabled";
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <4>;
-	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/dts/omap3-igep0020-common.dtsi b/arch/arm/dts/omap3-igep0020-common.dtsi
deleted file mode 100644
index 73d8f47..0000000
--- a/arch/arm/dts/omap3-igep0020-common.dtsi
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common Device Tree Source for IGEPv2
- *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-		compatible = "gpio-leds";
-
-		boot {
-			 label = "omap3:green:boot";
-			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			 default-state = "on";
-		};
-
-		user0 {
-			 label = "omap3:red:user0";
-			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user1 {
-			 label = "omap3:red:user1";
-			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user2 {
-			label = "omap3:green:user1";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
-		vcc-supply = <&hsusb1_power>;
-		#phy-cells = <0>;
-	};
-
-	tfp410: encoder {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&tfp410_pins
-		&dss_dpi_pins
-	>;
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-		>;
-	};
-
-	smsc9221_pins: pinmux_smsc9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs2.gpio_176 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb1_pins
-	>;
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
-		>;
-	};
-
-	mmc1_wp_pins: pinmux_mmc1_cd_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4)   /* etk_d15.gpio_29 */
-		>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in the EEPROM
-	 * as EDID data.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x01000000>,	/* CS0: 16MB for NAND */
-		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for ethernet */
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc9221_pins>;
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
-	/* Needed for DSS */
-	regulator-name = "vdds_dsi";
-};
-
-&dss {
-	status = "okay";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&mmc1 {
-	pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
-	wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;	/* gpio_29 */
-};
diff --git a/arch/arm/dts/omap3-igep0020-u-boot.dtsi b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
index 41beaf0..2c03701 100644
--- a/arch/arm/dts/omap3-igep0020-u-boot.dtsi
+++ b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
@@ -5,20 +5,10 @@
  * (C) Copyright 2017 Derald D. Woods <woods.technical@gmail.com>
  */
 
+#include "omap3-u-boot.dtsi"
+
 / {
 	chosen {
 		stdout-path = &uart3;
 	};
 };
-
-&uart1 {
-	reg-shift = <2>;
-};
-
-&uart2 {
-	reg-shift = <2>;
-};
-
-&uart3 {
-	reg-shift = <2>;
-};
diff --git a/arch/arm/dts/omap3-igep0020.dts b/arch/arm/dts/omap3-igep0020.dts
deleted file mode 100644
index cf3ac84..0000000
--- a/arch/arm/dts/omap3-igep0020.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- */
-
-#include "omap3-igep0020-common.dtsi"
-
-/ {
-	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
-
-	vmmcsdio_fixed: fixedregulator-mmcsdio {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsdio_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	mmc2_pwrseq: mmc2_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
-			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
-	};
-};
-
-&omap3_pmx_core {
-	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
-		>;
-	};
-};
-
-/* On board Wifi module */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
-	vmmc-supply = <&vmmcsdio_fixed>;
-	mmc-pwrseq = <&mmc2_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-};
diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
deleted file mode 100644
index 4a3d503..0000000
--- a/arch/arm/dts/salvator-common.dtsi
+++ /dev/null
@@ -1,1104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for common parts of Salvator-X board variants
- *
- * Copyright (C) 2015-2016 Renesas Electronics Corp.
- */
-
-/*
- * SSI-AK4613
- *
- * This command is required when Playback/Capture
- *
- *	amixer set "DVC Out" 100%
- *	amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *	amixer set "DVC Out Mute" on
- *	amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *	amixer set "DVC Out Ramp" on
- *	aplay xxx.wav &
- *	amixer set "DVC Out"  80%  // Volume Down
- *	amixer set "DVC Out" 100%  // Volume Up
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c_dvfs;
-		serial0 = &scif2;
-		serial1 = &hscif1;
-		ethernet0 = &avb;
-		mmc0 = &sdhi2;
-		mmc1 = &sdhi0;
-		mmc2 = &sdhi3;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	audio_clkout: audio-clkout {
-		/*
-		 * This is same as <&rcar_sound 0>
-		 * but needed to avoid cs2000/rcar_sound probe dead-lock
-		 */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12288000>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000>;
-
-		brightness-levels = <256 128 64 16 8 4 0>;
-		default-brightness-level = <6>;
-
-		power-supply = <&reg_12v>;
-		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	cvbs-in {
-		compatible = "composite-video-connector";
-		label = "CVBS IN";
-
-		port {
-			cvbs_con: endpoint {
-				remote-endpoint = <&adv7482_ain7>;
-			};
-		};
-	};
-
-	hdmi-in {
-		compatible = "hdmi-connector";
-		label = "HDMI IN";
-		type = "a";
-
-		port {
-			hdmi_in_con: endpoint {
-				remote-endpoint = <&adv7482_hdmi>;
-			};
-		};
-	};
-
-	hdmi0-out {
-		compatible = "hdmi-connector";
-		label = "HDMI0 OUT";
-		type = "a";
-
-		port {
-			hdmi0_con: endpoint {
-				remote-endpoint = <&rcar_dw_hdmi0_out>;
-			};
-		};
-	};
-
-	hdmi1-out {
-		compatible = "hdmi-connector";
-		label = "HDMI1 OUT";
-		type = "a";
-
-		port {
-			hdmi1_con: endpoint {
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keys_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW4-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW4-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW4-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW4-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "TSW0";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "TSW1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "TSW2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_12v: regulator-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-12V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sound_card: sound {
-		compatible = "audio-graph-card";
-
-		label = "rcar-sound";
-
-		dais = <&rsnd_port0	/* ak4613 */
-			&rsnd_port1	/* HDMI0  */
-#ifdef SOC_HAS_HDMI1
-			&rsnd_port2	/* HDMI1  */
-#endif
-			>;
-	};
-
-	vbus0_usb2: regulator-vbus0-usb2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB20_VBUS0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi3: regulator-vcc-sdhi3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI3 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi3: regulator-vccq-sdhi3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI3 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	x12_clk: x12 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	/* External DU dot clocks */
-	x21_clk: x21-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <33000000>;
-	};
-
-	x22_clk: x22-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <33000000>;
-	};
-
-	x23_clk: x23-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-};
-
-&a57_0 {
-	cpu-supply = <&dvfs>;
-};
-
-&audio_clk_a {
-	clock-frequency = <22579200>;
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&phy0>;
-	tx-internal-delay-ps = <2000>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&csi20 {
-	status = "okay";
-
-	ports {
-		port@0 {
-			csi20_in: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1>;
-				remote-endpoint = <&adv7482_txb>;
-			};
-		};
-	};
-};
-
-&csi40 {
-	status = "okay";
-
-	ports {
-		port@0 {
-			csi40_in: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&adv7482_txa>;
-			};
-		};
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	ports {
-		port@0 {
-			du_out_rgb: endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
-
-&ehci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&extalr_clk {
-	clock-frequency = <32768>;
-};
-
-&hdmi0 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			reg = <1>;
-			rcar_dw_hdmi0_out: endpoint {
-				remote-endpoint = <&hdmi0_con>;
-			};
-		};
-		port@2 {
-			reg = <2>;
-			dw_hdmi0_snd_in: endpoint {
-				remote-endpoint = <&rsnd_endpoint1>;
-			};
-		};
-	};
-};
-
-#ifdef SOC_HAS_HDMI1
-&hdmi1 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			reg = <1>;
-			rcar_dw_hdmi1_out: endpoint {
-				remote-endpoint = <&hdmi1_con>;
-			};
-		};
-		port@2 {
-			reg = <2>;
-			dw_hdmi1_snd_in: endpoint {
-				remote-endpoint = <&rsnd_endpoint2>;
-			};
-		};
-	};
-};
-
-&hdmi1_con {
-	remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-#endif /* SOC_HAS_HDMI1 */
-
-&hscif1 {
-	pinctrl-0 = <&hscif1_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	/* Please only enable hscif1 or scif1 */
-	status = "okay";
-};
-
-&hsusb {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	clock-frequency = <100000>;
-
-	ak4613: codec@10 {
-		compatible = "asahi-kasei,ak4613";
-		#sound-dai-cells = <0>;
-		reg = <0x10>;
-		clocks = <&rcar_sound 3>;
-
-		asahi-kasei,in1-single-end;
-		asahi-kasei,in2-single-end;
-		asahi-kasei,out1-single-end;
-		asahi-kasei,out2-single-end;
-		asahi-kasei,out3-single-end;
-		asahi-kasei,out4-single-end;
-		asahi-kasei,out5-single-end;
-		asahi-kasei,out6-single-end;
-
-		port {
-			ak4613_endpoint: endpoint {
-				remote-endpoint = <&rsnd_endpoint0>;
-			};
-		};
-	};
-
-	cs2000: clk_multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&audio_clkout>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-
-		assigned-clocks = <&cs2000>;
-		assigned-clock-rates = <24576000>; /* 1/1 divide */
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	pca9654: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	video-receiver@70 {
-		compatible = "adi,adv7482";
-		reg = <0x70 0x71 0x72 0x73 0x74 0x75
-		       0x60 0x61 0x62 0x63 0x64 0x65>;
-		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
-			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
-
-		interrupt-parent = <&gpio6>;
-		interrupt-names = "intrq1", "intrq2";
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
-			     <31 IRQ_TYPE_LEVEL_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@7 {
-				reg = <7>;
-
-				adv7482_ain7: endpoint {
-					remote-endpoint = <&cvbs_con>;
-				};
-			};
-
-			port@8 {
-				reg = <8>;
-
-				adv7482_hdmi: endpoint {
-					remote-endpoint = <&hdmi_in_con>;
-				};
-			};
-
-			port@a {
-				reg = <10>;
-
-				adv7482_txa: endpoint {
-					clock-lanes = <0>;
-					data-lanes = <1 2 3 4>;
-					remote-endpoint = <&csi40_in>;
-				};
-			};
-
-			port@b {
-				reg = <11>;
-
-				adv7482_txb: endpoint {
-					clock-lanes = <0>;
-					data-lanes = <1>;
-					remote-endpoint = <&csi20_in>;
-				};
-			};
-		};
-	};
-
-	csa_vdd: adc@7c {
-		compatible = "maxim,max9611";
-		reg = <0x7c>;
-
-		shunt-resistor-micro-ohms = <5000>;
-	};
-
-	csa_dvfs: adc@7f {
-		compatible = "maxim,max9611";
-		reg = <0x7f>;
-
-		shunt-resistor-micro-ohms = <5000>;
-	};
-};
-
-&i2c_dvfs {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	pmic: pmic@30 {
-		pinctrl-0 = <&irq0_pins>;
-		pinctrl-names = "default";
-
-		compatible = "rohm,bd9571mwv";
-		reg = <0x30>;
-		interrupt-parent = <&intc_ex>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		rohm,ddr-backup-power = <0xf>;
-		rohm,rstbmode-level;
-
-		regulators {
-			dvfs: dvfs {
-				regulator-name = "dvfs";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1030000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	eeprom@50 {
-		compatible = "rohm,br24t01", "atmel,24c01";
-		reg = <0x50>;
-		pagesize = <8>;
-	};
-};
-
-&ohci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	clock-frequency = <100000000>;
-};
-
-&pciec0 {
-	status = "okay";
-};
-
-&pciec1 {
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	avb_pins: avb {
-		mux {
-			groups = "avb_link", "avb_mdio", "avb_mii";
-			function = "avb";
-		};
-
-		pins_mdio {
-			groups = "avb_mdio";
-			drive-strength = <24>;
-		};
-
-		pins_mii_tx {
-			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
-			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
-			drive-strength = <12>;
-		};
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
-		function = "du";
-	};
-
-	hscif1_pins: hscif1 {
-		groups = "hscif1_data_a", "hscif1_ctrl_a";
-		function = "hscif1";
-	};
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2_a";
-		function = "i2c2";
-	};
-
-	irq0_pins: irq0 {
-		groups = "intc_ex_irq0";
-		function = "intc_ex";
-	};
-
-	keys_pins: keys {
-		pins = "GP_5_17", "GP_5_20", "GP_5_22";
-		bias-pull-up;
-	};
-
-	pwm1_pins: pwm1 {
-		groups = "pwm1_a";
-		function = "pwm1";
-	};
-
-	scif1_pins: scif1 {
-		groups = "scif1_data_a", "scif1_ctrl";
-		function = "scif1";
-	};
-
-	scif2_pins: scif2 {
-		groups = "scif2_data_a";
-		function = "scif2";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk_a";
-		function = "scif_clk";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	sdhi3_pins: sd3 {
-		groups = "sdhi3_data4", "sdhi3_ctrl";
-		function = "sdhi3";
-		power-source = <3300>;
-	};
-
-	sdhi3_pins_uhs: sd3_uhs {
-		groups = "sdhi3_data4", "sdhi3_ctrl";
-		function = "sdhi3";
-		power-source = <1800>;
-	};
-
-	sound_pins: sound {
-		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
-		function = "ssi";
-	};
-
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
-			 "audio_clkout_a", "audio_clkout3_a";
-		function = "audio_clk";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		mux {
-			groups = "usb1";
-			function = "usb1";
-		};
-
-		ovc {
-			pins = "GP_6_27";
-			bias-pull-up;
-		};
-
-		pwen {
-			pins = "GP_6_26";
-			bias-pull-down;
-		};
-	};
-
-	usb30_pins: usb30 {
-		groups = "usb30";
-		function = "usb30";
-	};
-};
-
-&pwm1 {
-	pinctrl-0 = <&pwm1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* audio_clkout0/1/2/3 */
-	#clock-cells = <1>;
-	clock-frequency = <12288000 11289600>;
-
-	status = "okay";
-
-	/* update <audio_clk_b> to <cs2000> */
-	clocks = <&cpg CPG_MOD 1005>,
-		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-		 <&audio_clk_a>, <&cs2000>,
-		 <&audio_clk_c>,
-		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		rsnd_port0: port@0 {
-			reg = <0>;
-			rsnd_endpoint0: endpoint {
-				remote-endpoint = <&ak4613_endpoint>;
-
-				dai-format = "left_j";
-				bitclock-master = <&rsnd_endpoint0>;
-				frame-master = <&rsnd_endpoint0>;
-
-				playback = <&ssi0>, <&src0>, <&dvc0>;
-				capture = <&ssi1>, <&src1>, <&dvc1>;
-			};
-		};
-
-		rsnd_port1: port@1 {
-			reg = <1>;
-			rsnd_endpoint1: endpoint {
-				remote-endpoint = <&dw_hdmi0_snd_in>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_endpoint1>;
-				frame-master = <&rsnd_endpoint1>;
-
-				playback = <&ssi2>;
-			};
-		};
-
-#ifdef SOC_HAS_HDMI1
-		rsnd_port2: port@2 {
-			reg = <2>;
-			rsnd_endpoint2: endpoint {
-				remote-endpoint = <&dw_hdmi1_snd_in>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_endpoint2>;
-				frame-master = <&rsnd_endpoint2>;
-
-				playback = <&ssi3>;
-			};
-		};
-#endif /* SOC_HAS_HDMI1 */
-	};
-};
-
-&rpc {
-	/* Left disabled.  To be enabled by firmware when unlocked. */
-
-	flash@0 {
-		compatible = "cypress,hyperflash", "cfi-flash";
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootparam@0 {
-				reg = <0x00000000 0x040000>;
-				read-only;
-			};
-			bl2@40000 {
-				reg = <0x00040000 0x140000>;
-				read-only;
-			};
-			cert_header_sa6@180000 {
-				reg = <0x00180000 0x040000>;
-				read-only;
-			};
-			bl31@1c0000 {
-				reg = <0x001c0000 0x040000>;
-				read-only;
-			};
-			tee@200000 {
-				reg = <0x00200000 0x440000>;
-				read-only;
-			};
-			uboot@640000 {
-				reg = <0x00640000 0x100000>;
-				read-only;
-			};
-			dtb@740000 {
-				reg = <0x00740000 0x080000>;
-			};
-			kernel@7c0000 {
-				reg = <0x007c0000 0x1400000>;
-			};
-			user@1bc0000 {
-				reg = <0x01bc0000 0x2440000>;
-			};
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-#ifdef SOC_HAS_SATA
-&sata {
-	status = "okay";
-};
-#endif /* SOC_HAS_SATA */
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	/* Please only enable hscif1 or scif1 */
-	/* status = "okay"; */
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi2 {
-	/* used for on-board 8bit eMMC */
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	no-sd;
-	no-sdio;
-	non-removable;
-	fixed-emmc-driver-type = <1>;
-	full-pwr-cycle-in-suspend;
-	status = "okay";
-};
-
-&sdhi3 {
-	pinctrl-0 = <&sdhi3_pins>;
-	pinctrl-1 = <&sdhi3_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi3>;
-	vqmmc-supply = <&vccq_sdhi3>;
-	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-&usb_extal_clk {
-	clock-frequency = <50000000>;
-};
-
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	vbus-supply = <&vbus0_usb2>;
-	status = "okay";
-};
-
-&usb2_phy1 {
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&usb3_peri0 {
-	phys = <&usb3_phy0>;
-	phy-names = "usb";
-
-	companion = <&xhci0>;
-
-	status = "okay";
-};
-
-&usb3_phy0 {
-	status = "okay";
-};
-
-&usb3s0_clk {
-	clock-frequency = <100000000>;
-};
-
-&vin0 {
-	status = "okay";
-};
-
-&vin1 {
-	status = "okay";
-};
-
-&vin2 {
-	status = "okay";
-};
-
-&vin3 {
-	status = "okay";
-};
-
-&vin4 {
-	status = "okay";
-};
-
-&vin5 {
-	status = "okay";
-};
-
-&vin6 {
-	status = "okay";
-};
-
-&vin7 {
-	status = "okay";
-};
-
-&xhci0 {
-	pinctrl-0 = <&usb30_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-#ifdef SOC_HAS_USB2_CH2
-&ehci2 {
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&pfc {
-	usb2_pins: usb2 {
-		groups = "usb2";
-		function = "usb2";
-	};
-};
-
-&usb2_phy2 {
-	pinctrl-0 = <&usb2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-#endif /* SOC_HAS_USB2_CH2 */
diff --git a/arch/arm/dts/salvator-x.dtsi b/arch/arm/dts/salvator-x.dtsi
deleted file mode 100644
index ddee50e..0000000
--- a/arch/arm/dts/salvator-x.dtsi
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Salvator-X board
- *
- * Copyright (C) 2015-2016 Renesas Electronics Corp.
- */
-
-#include "salvator-common.dtsi"
-
-/ {
-	model = "Renesas Salvator-X board";
-	compatible = "renesas,salvator-x";
-};
-
-&extal_clk {
-	clock-frequency = <16666666>;
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-
-	versaclock5: clock-generator@6a {
-		compatible = "idt,5p49v5923";
-		reg = <0x6a>;
-		#clock-cells = <1>;
-		clocks = <&x23_clk>;
-		clock-names = "xin";
-	};
-};
diff --git a/arch/arm/dts/salvator-xs.dtsi b/arch/arm/dts/salvator-xs.dtsi
deleted file mode 100644
index 08b9256..0000000
--- a/arch/arm/dts/salvator-xs.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Salvator-X 2nd version board
- *
- * Copyright (C) 2015-2017 Renesas Electronics Corp.
- */
-
-#include "salvator-common.dtsi"
-
-/ {
-	model = "Renesas Salvator-X 2nd version board";
-	compatible = "renesas,salvator-xs";
-};
-
-&extal_clk {
-	clock-frequency = <16640000>;
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-
-	versaclock6: clock-generator@6a {
-		compatible = "idt,5p49v6901";
-		reg = <0x6a>;
-		#clock-cells = <1>;
-		clocks = <&x23_clk>;
-		clock-names = "xin";
-	};
-};
-
-#ifdef SOC_HAS_SATA
-&pca9654 {
-	pcie-sata-switch-hog {
-		gpio-hog;
-		gpios = <7 GPIO_ACTIVE_HIGH>;
-		output-low; /* enable SATA by default */
-		line-name = "PCIE/SATA switch";
-	};
-};
-
-/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
-#endif /* SOC_HAS_SATA */
-
-#ifdef SOC_HAS_USB2_CH3
-&ehci3 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&hsusb3 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ohci3 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&pfc {
-	/*
-	 * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
-	 *   (when SW31 is the default setting on Salvator-XS).
-	 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
-	 *   r8a77951 with Salvator-XS.
-	 *   Hence the SW31 setting must be changed like 2) below.
-	 *   1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
-	 *	- Connect GP6_3[01] to ADV7842.
-	 *   2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
-	 *	- Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
-	 *	- Connect GP6_{04,21} to ADV7842.
-	 */
-	usb2_ch3_pins: usb2_ch3 {
-		groups = "usb2_ch3";
-		function = "usb2_ch3";
-	};
-};
-
-&usb2_phy3 {
-	pinctrl-0 = <&usb2_ch3_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-#endif /* SOC_HAS_USB2_CH3 */
diff --git a/arch/arm/dts/ulcb-audio-graph-card.dtsi b/arch/arm/dts/ulcb-audio-graph-card.dtsi
deleted file mode 100644
index 3be54df..0000000
--- a/arch/arm/dts/ulcb-audio-graph-card.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for ULCB + Audio Graph Card
- *
- * Copyright (C) 2022 Renesas Electronics Corp.
- */
-
-/*
- *	(A) CPU0 <-----> ak4613
- *	(B) CPU1  -----> HDMI
- *
- *	(A) aplay   -D plughw:0,0 xxx.wav
- *	(B) aplay   -D plughw:0,1 xxx.wav
- *
- *	(A) arecord -D plughw:0,0 xxx.wav
- */
-
-/ {
-	sound_card: sound {
-		compatible = "audio-graph-card";
-		label = "rcar-sound";
-
-		dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
-			&rsnd_port1 /* (B) CPU1  -> HDMI   */
-		>;
-	};
-};
-
-&ak4613 {
-	#sound-dai-cells = <0>;
-
-	port {
-		/*
-		 * (A) CPU0 <-> ak4613
-		 */
-		ak4613_endpoint: endpoint {
-			remote-endpoint = <&rsnd_for_ak4613>;
-		};
-	};
-};
-
-&hdmi0 {
-	ports {
-		port@2 {
-			/*
-			 * (B) CPU1 -> HDMI
-			 */
-			dw_hdmi0_snd_in: endpoint {
-				remote-endpoint = <&rsnd_for_hdmi>;
-			};
-		};
-	};
-};
-
-&rcar_sound {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		rsnd_port0: port@0 {
-			/*
-			 * (A) CPU0 <-> ak4613
-			 */
-			reg = <0>;
-			rsnd_for_ak4613: endpoint {
-				remote-endpoint = <&ak4613_endpoint>;
-				bitclock-master;
-				frame-master;
-				playback = <&ssi0>, <&src0>, <&dvc0>;
-				capture  = <&ssi1>, <&src1>, <&dvc1>;
-			};
-		};
-		rsnd_port1: port@1 {
-			/*
-			 * (B) CPU1 -> HDMI
-			 */
-			reg = <1>;
-			rsnd_for_hdmi: endpoint {
-				remote-endpoint = <&dw_hdmi0_snd_in>;
-				bitclock-master;
-				frame-master;
-				playback = <&ssi2>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/dts/ulcb-audio-graph-card2.dtsi b/arch/arm/dts/ulcb-audio-graph-card2.dtsi
deleted file mode 100644
index 5ebec12..0000000
--- a/arch/arm/dts/ulcb-audio-graph-card2.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for ULCB + Audio Graph Card2
- *
- * Copyright (C) 2022 Renesas Electronics Corp.
- */
-
-/*
- *	(A) CPU0 <----> ak4613
- *	(B) CPU1  ----> HDMI
- *
- *	(A) aplay   -D plughw:0,0 xxx.wav
- *	(B) aplay   -D plughw:0,1 xxx.wav
- *
- *	(A) arecord -D plughw:0,0 xxx.wav
- */
-#include "ulcb-audio-graph-card.dtsi"
-
-&sound_card {
-	compatible = "audio-graph-card2";
-
-	/delete-property/ dais;
-	links = <&rsnd_port0	/* (A) CPU0 <-> ak4613 */
-		 &rsnd_port1	/* (B) CPU1  -> HDMI   */
-		>;
-};
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
deleted file mode 100644
index 0be2716..0000000
--- a/arch/arm/dts/ulcb.dtsi
+++ /dev/null
@@ -1,509 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car Gen3 ULCB board
- *
- * Copyright (C) 2016 Renesas Electronics Corp.
- * Copyright (C) 2016 Cogent Embedded, Inc.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Renesas R-Car Gen3 ULCB board";
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c_dvfs;
-		serial0 = &scif2;
-		ethernet0 = &avb;
-		mmc0 = &sdhi2;
-		mmc1 = &sdhi0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	audio_clkout: audio-clkout {
-		/*
-		 * This is same as <&rcar_sound 0>
-		 * but needed to avoid cs2000/rcar_sound probe dead-lock
-		 */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12288000>;
-	};
-
-	hdmi0-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi0_con: endpoint {
-				remote-endpoint = <&rcar_dw_hdmi0_out>;
-			};
-		};
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		key-1 {
-			linux,code = <KEY_1>;
-			label = "SW3";
-			wakeup-source;
-			debounce-interval = <20>;
-			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led5 {
-			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
-		};
-		led6 {
-			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	x12_clk: x12 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	x23_clk: x23-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-};
-
-&a57_0 {
-	cpu-supply = <&dvfs>;
-};
-
-&audio_clk_a {
-	clock-frequency = <22579200>;
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&phy0>;
-	tx-internal-delay-ps = <2000>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&du {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <16666666>;
-};
-
-&extalr_clk {
-	clock-frequency = <32768>;
-};
-
-&hdmi0 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			reg = <1>;
-			rcar_dw_hdmi0_out: endpoint {
-				remote-endpoint = <&hdmi0_con>;
-			};
-		};
-		port@2 {
-			reg = <2>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	clock-frequency = <100000>;
-
-	ak4613: codec@10 {
-		compatible = "asahi-kasei,ak4613";
-		reg = <0x10>;
-		clocks = <&rcar_sound 3>;
-
-		asahi-kasei,in1-single-end;
-		asahi-kasei,in2-single-end;
-		asahi-kasei,out1-single-end;
-		asahi-kasei,out2-single-end;
-		asahi-kasei,out3-single-end;
-		asahi-kasei,out4-single-end;
-		asahi-kasei,out5-single-end;
-		asahi-kasei,out6-single-end;
-	};
-
-	cs2000: clk-multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&audio_clkout>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-
-		assigned-clocks = <&cs2000>;
-		assigned-clock-rates = <24576000>; /* 1/1 divide */
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	versaclock5: clock-generator@6a {
-		compatible = "idt,5p49v5925";
-		reg = <0x6a>;
-		#clock-cells = <1>;
-		clocks = <&x23_clk>;
-		clock-names = "xin";
-	};
-};
-
-&i2c_dvfs {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	pmic: pmic@30 {
-		pinctrl-0 = <&irq0_pins>;
-		pinctrl-names = "default";
-
-		compatible = "rohm,bd9571mwv";
-		reg = <0x30>;
-		interrupt-parent = <&intc_ex>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		rohm,ddr-backup-power = <0xf>;
-		rohm,rstbmode-pulse;
-
-		regulators {
-			dvfs: dvfs {
-				regulator-name = "dvfs";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1030000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	eeprom@50 {
-		compatible = "rohm,br24t01", "atmel,24c01";
-		reg = <0x50>;
-		pagesize = <8>;
-	};
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	avb_pins: avb {
-		mux {
-			groups = "avb_link", "avb_mdio", "avb_mii";
-			function = "avb";
-		};
-
-		pins_mdio {
-			groups = "avb_mdio";
-			drive-strength = <24>;
-		};
-
-		pins_mii_tx {
-			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
-			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
-			drive-strength = <12>;
-		};
-	};
-
-	i2c2_pins: i2c2 {
-		groups = "i2c2_a";
-		function = "i2c2";
-	};
-
-	irq0_pins: irq0 {
-		groups = "intc_ex_irq0";
-		function = "intc_ex";
-	};
-
-	scif2_pins: scif2 {
-		groups = "scif2_data_a";
-		function = "scif2";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk_a";
-		function = "scif_clk";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
-		function = "sdhi2";
-		power-source = <1800>;
-	};
-
-	sound_pins: sound {
-		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
-		function = "ssi";
-	};
-
-	sound_clk_pins: sound-clk {
-		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
-			 "audio_clkout_a", "audio_clkout3_a";
-		function = "audio_clk";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* audio_clkout0/1/2/3 */
-	#clock-cells = <1>;
-	clock-frequency = <12288000 11289600>;
-
-	status = "okay";
-
-	/* update <audio_clk_b> to <cs2000> */
-	clocks = <&cpg CPG_MOD 1005>,
-		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-		 <&audio_clk_a>, <&cs2000>,
-		 <&audio_clk_c>,
-		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
-};
-
-&rpc {
-	/* Left disabled.  To be enabled by firmware when unlocked. */
-
-	flash@0 {
-		compatible = "cypress,hyperflash", "cfi-flash";
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			bootparam@0 {
-				reg = <0x00000000 0x040000>;
-				read-only;
-			};
-			bl2@40000 {
-				reg = <0x00040000 0x140000>;
-				read-only;
-			};
-			cert_header_sa6@180000 {
-				reg = <0x00180000 0x040000>;
-				read-only;
-			};
-			bl31@1c0000 {
-				reg = <0x001c0000 0x040000>;
-				read-only;
-			};
-			tee@200000 {
-				reg = <0x00200000 0x440000>;
-				read-only;
-			};
-			uboot@640000 {
-				reg = <0x00640000 0x100000>;
-				read-only;
-			};
-			dtb@740000 {
-				reg = <0x00740000 0x080000>;
-			};
-			kernel@7c0000 {
-				reg = <0x007c0000 0x1400000>;
-			};
-			user@1bc0000 {
-				reg = <0x01bc0000 0x2440000>;
-			};
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi2 {
-	/* used for on-board 8bit eMMC */
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	no-sd;
-	no-sdio;
-	non-removable;
-	full-pwr-cycle-in-suspend;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-&usb2_phy1 {
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-
-/*
- * For sound-test.
- *
- * We can switch Audio Card for testing
- *
- * #include "ulcb-simple-audio-card.dtsi"
- * #include "ulcb-simple-audio-card-mix+split.dtsi"
- * #include "ulcb-audio-graph-card.dtsi"
- * #include "ulcb-audio-graph-card-mix+split.dtsi"
- * #include "ulcb-audio-graph-card2-mix+split.dtsi"
- */
-#include "ulcb-audio-graph-card2.dtsi"
diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
index 1bd5233..4e9d092 100644
--- a/arch/arm/mach-k3/Makefile
+++ b/arch/arm/mach-k3/Makefile
@@ -13,6 +13,7 @@
 obj-$(CONFIG_SOC_K3_AM625) += am625_fdt.o
 obj-$(CONFIG_SOC_K3_AM62A7) += am62a7_fdt.o
 obj-$(CONFIG_SOC_K3_J784S4) += j784s4_fdt.o
+obj-$(CONFIG_SOC_K3_AM62P5) += am62p5_fdt.o
 endif
 ifeq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_SOC_K3_AM654) += am654_init.o
diff --git a/arch/arm/mach-k3/am62p5_fdt.c b/arch/arm/mach-k3/am62p5_fdt.c
new file mode 100644
index 0000000..d67f012
--- /dev/null
+++ b/arch/arm/mach-k3/am62p5_fdt.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <asm/hardware.h>
+#include "common_fdt.h"
+#include <fdt_support.h>
+
+int ft_system_setup(void *blob, struct bd_info *bd)
+{
+	fdt_fixup_reserved(blob, "tfa", CONFIG_K3_ATF_LOAD_ADDR, 0x80000);
+	fdt_fixup_reserved(blob, "optee", CONFIG_K3_OPTEE_LOAD_ADDR, 0x1800000);
+
+	return 0;
+}
diff --git a/arch/arm/mach-k3/am62px/Kconfig b/arch/arm/mach-k3/am62px/Kconfig
index 38a9e68..76ae86b 100644
--- a/arch/arm/mach-k3/am62px/Kconfig
+++ b/arch/arm/mach-k3/am62px/Kconfig
@@ -13,6 +13,7 @@
 	bool "TI K3 based AM62P5 EVM running on A53"
 	select ARM64
 	select BINMAN
+	select OF_SYSTEM_SETUP
 
 config TARGET_AM62P5_R5_EVM
 	bool "TI K3 based AM62P5 EVM running on R5"
diff --git a/arch/riscv/cpu/andes/cache.c b/arch/riscv/cpu/andes/cache.c
index 7d3df87..bb57498 100644
--- a/arch/riscv/cpu/andes/cache.c
+++ b/arch/riscv/cpu/andes/cache.c
@@ -43,9 +43,7 @@
 
 void flush_dcache_all(void)
 {
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
-	csr_write(CSR_MCCTLCOMMAND, CCTL_L1D_WBINVAL_ALL);
-#endif
+	csr_write(CSR_UCCTLCOMMAND, CCTL_L1D_WBINVAL_ALL);
 }
 
 void flush_dcache_range(unsigned long start, unsigned long end)
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index a9e1935..8e58f64 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -210,10 +210,6 @@
 	bnez	s2, secondary_hart_loop
 #endif
 
-	/* Enable cache */
-	jal	icache_enable
-	jal	dcache_enable
-
 #ifdef CONFIG_DEBUG_UART
 	jal	debug_uart_init
 #endif
diff --git a/arch/riscv/include/asm/arch-andes/csr.h b/arch/riscv/include/asm/arch-andes/csr.h
index 028fd01..7d6104a 100644
--- a/arch/riscv/include/asm/arch-andes/csr.h
+++ b/arch/riscv/include/asm/arch-andes/csr.h
@@ -12,7 +12,7 @@
 
 #define CSR_MCACHE_CTL 0x7ca
 #define CSR_MMISC_CTL 0x7d0
-#define CSR_MCCTLCOMMAND 0x7cc
+#define CSR_UCCTLCOMMAND 0x80c
 
 /* mcache_ctl register */
 
diff --git a/board/armltd/vexpress/MAINTAINERS b/board/armltd/vexpress/MAINTAINERS
index 2b3e491..7a54c6b 100644
--- a/board/armltd/vexpress/MAINTAINERS
+++ b/board/armltd/vexpress/MAINTAINERS
@@ -1,5 +1,5 @@
 VERSATILE EXPRESS BOARDS
-M:	Kristian Amlie <kristian.amlie@northern.tech>
+M:	Josef Holzmayr <josef.holzmayr@northern.tech>
 S:	Maintained
 F:	board/armltd/vexpress/
 F:	include/configs/vexpress_ca9x4.h
diff --git a/board/beacon/beacon-rzg2m/MAINTAINERS b/board/beacon/beacon-rzg2m/MAINTAINERS
index f8042bb..a4a920a 100644
--- a/board/beacon/beacon-rzg2m/MAINTAINERS
+++ b/board/beacon/beacon-rzg2m/MAINTAINERS
@@ -1,5 +1,6 @@
 BEACON_RZG2M BOARD
 M:	Adam Ford <aford173@gmail.com>
+M:	Marek Vasut <marek.vasut+renesas@mailbox.org>
 S:	Maintained
 F:	board/beacon/beacon-rzg2m/
 F:	include/configs/beacon-rzg2m.h
diff --git a/board/hardkernel/odroid_go2/MAINTAINERS b/board/hardkernel/odroid_go2/MAINTAINERS
index 4d4c6e8..9e83bc9 100644
--- a/board/hardkernel/odroid_go2/MAINTAINERS
+++ b/board/hardkernel/odroid_go2/MAINTAINERS
@@ -1,5 +1,5 @@
 GO2
-M:      Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+M:      Heiko Stuebner <heiko.stuebner@cherry.de>
 S:      Maintained
 F:      board/hardkernel/odroid_go2/
 F:      include/configs/odroid_go2.h
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 0f0a9c5..8537b96 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -29,18 +29,6 @@
 #include <fdt_support.h>
 #include "igep00x0.h"
 
-static const struct ns16550_plat igep_serial = {
-	.base = OMAP34XX_UART3,
-	.reg_shift = 2,
-	.clock = V_NS16550_CLK,
-	.fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DRVINFO(igep_uart) = {
-	"ns16550_serial",
-	&igep_serial
-};
-
 /*
  * Routine: get_board_revision
  * Description: GPIO_28 and GPIO_129 are used to read board and revision from
diff --git a/board/microchip/mpfs_icicle/mpfs_icicle.c b/board/microchip/mpfs_icicle/mpfs_icicle.c
index 0f5f829..31523c0 100644
--- a/board/microchip/mpfs_icicle/mpfs_icicle.c
+++ b/board/microchip/mpfs_icicle/mpfs_icicle.c
@@ -73,25 +73,13 @@
 int board_late_init(void)
 {
 	u32 ret;
-	u32 node;
+	int node;
 	u8 idx;
 	u8 device_serial_number[16] = { 0 };
 	unsigned char mac_addr[6];
 	char icicle_mac_addr[20];
 	void *blob = (void *)gd->fdt_blob;
 
-	node = fdt_path_offset(blob, "/soc/ethernet@20112000");
-	if (node < 0) {
-		printf("No ethernet0 path offset\n");
-		return -ENODEV;
-	}
-
-	ret = fdtdec_get_byte_array(blob, node, "local-mac-address", mac_addr, 6);
-	if (ret) {
-		printf("No local-mac-address property for ethernet@20112000\n");
-		return -EINVAL;
-	}
-
 	read_device_serial_number(device_serial_number, 16);
 
 	/* Update MAC address with device serial number */
@@ -102,10 +90,13 @@
 	mac_addr[4] = device_serial_number[1];
 	mac_addr[5] = device_serial_number[0];
 
-	ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
-	if (ret) {
-		printf("Error setting local-mac-address property for ethernet@20112000\n");
-		return -ENODEV;
+	node = fdt_path_offset(blob, "/soc/ethernet@20112000");
+	if (node >= 0) {
+		ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
+		if (ret) {
+			printf("Error setting local-mac-address property for ethernet@20112000\n");
+			return -ENODEV;
+		}
 	}
 
 	icicle_mac_addr[0] = '[';
diff --git a/board/starfive/visionfive2/spl.c b/board/starfive/visionfive2/spl.c
index b555189..b794b73 100644
--- a/board/starfive/visionfive2/spl.c
+++ b/board/starfive/visionfive2/spl.c
@@ -86,6 +86,43 @@
 		"tx-internal-delay-ps", "0"},
 };
 
+static const struct starfive_vf2_pro star64_pine64[] = {
+	{"/soc/ethernet@16030000", "starfive,tx-use-rgmii-clk", NULL},
+	{"/soc/ethernet@16040000", "starfive,tx-use-rgmii-clk", NULL},
+
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"motorcomm,tx-clk-adj-enabled", NULL},
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"motorcomm,tx-clk-10-inverted", NULL},
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"motorcomm,tx-clk-100-inverted", NULL},
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"motorcomm,tx-clk-1000-inverted", NULL},
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"motorcomm,rx-clk-drv-microamp", "2910"},
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"motorcomm,rx-data-drv-microamp", "2910"},
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"rx-internal-delay-ps", "1900"},
+	{"/soc/ethernet@16030000/mdio/ethernet-phy@0",
+		"tx-internal-delay-ps", "1500"},
+
+	{"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+		"motorcomm,tx-clk-adj-enabled", NULL},
+	{"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+		"motorcomm,tx-clk-10-inverted", NULL},
+	{"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+		"motorcomm,tx-clk-100-inverted", NULL},
+	{"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+		"motorcomm,rx-clk-drv-microamp", "2910"},
+	{"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+		"motorcomm,rx-data-drv-microamp", "2910"},
+	{"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+		"rx-internal-delay-ps", "0"},
+	{"/soc/ethernet@16040000/mdio/ethernet-phy@1",
+		"tx-internal-delay-ps", "300"},
+};
+
 void spl_fdt_fixup_mars(void *fdt)
 {
 	static const char compat[] = "milkv,mars\0starfive,jh7110";
@@ -250,6 +287,56 @@
 	}
 }
 
+void spl_fdt_fixup_star64(void *fdt)
+{
+	static const char compat[] = "pine64,star64\0starfive,jh7110";
+	u32 phandle;
+	u8 i;
+	int offset;
+	int ret;
+
+	fdt_setprop(fdt, fdt_path_offset(fdt, "/"), "compatible", compat, sizeof(compat));
+	fdt_setprop_string(fdt, fdt_path_offset(fdt, "/"), "model",
+			   "Pine64 Star64");
+
+	/* gmac0 */
+	offset = fdt_path_offset(fdt, "/soc/clock-controller@17000000");
+	phandle = fdt_get_phandle(fdt, offset);
+	offset = fdt_path_offset(fdt, "/soc/ethernet@16030000");
+
+	fdt_setprop_u32(fdt, offset, "assigned-clocks", phandle);
+	fdt_appendprop_u32(fdt, offset, "assigned-clocks", JH7110_AONCLK_GMAC0_TX);
+	fdt_setprop_u32(fdt, offset,  "assigned-clock-parents", phandle);
+	fdt_appendprop_u32(fdt, offset,  "assigned-clock-parents",
+			   JH7110_AONCLK_GMAC0_RMII_RTX);
+
+	/* gmac1 */
+	offset = fdt_path_offset(fdt, "/soc/clock-controller@13020000");
+	phandle = fdt_get_phandle(fdt, offset);
+	offset = fdt_path_offset(fdt, "/soc/ethernet@16040000");
+
+	fdt_setprop_u32(fdt, offset, "assigned-clocks", phandle);
+	fdt_appendprop_u32(fdt, offset, "assigned-clocks", JH7110_SYSCLK_GMAC1_TX);
+	fdt_setprop_u32(fdt, offset,  "assigned-clock-parents", phandle);
+	fdt_appendprop_u32(fdt, offset,  "assigned-clock-parents",
+			   JH7110_SYSCLK_GMAC1_RMII_RTX);
+
+	for (i = 0; i < ARRAY_SIZE(star64_pine64); i++) {
+		offset = fdt_path_offset(fdt, star64_pine64[i].path);
+
+		if (star64_pine64[i].value)
+			ret = fdt_setprop_u32(fdt, offset,  star64_pine64[i].name,
+					      dectoul(star64_pine64[i].value, NULL));
+		else
+			ret = fdt_setprop_empty(fdt, offset, star64_pine64[i].name);
+
+		if (ret) {
+			pr_err("%s set prop %s fail.\n", __func__, star64_pine64[i].name);
+				break;
+		}
+	}
+}
+
 void spl_perform_fixups(struct spl_image_info *spl_image)
 {
 	u8 version;
@@ -278,6 +365,8 @@
 			spl_fdt_fixup_version_b(spl_image->fdt_addr);
 		break;
 		};
+	} else if (!strncmp(product_id, "STAR64", 6)) {
+		spl_fdt_fixup_star64(spl_image->fdt_addr);
 	} else {
 		pr_err("Unknown product %s\n", product_id);
 	};
diff --git a/board/starfive/visionfive2/starfive_visionfive2.c b/board/starfive/visionfive2/starfive_visionfive2.c
index 6be5348..f611460 100644
--- a/board/starfive/visionfive2/starfive_visionfive2.c
+++ b/board/starfive/visionfive2/starfive_visionfive2.c
@@ -27,6 +27,8 @@
 	"starfive/jh7110-starfive-visionfive-2-v1.2a.dtb"
 #define FDTFILE_VISIONFIVE2_1_3B \
 	"starfive/jh7110-starfive-visionfive-2-v1.3b.dtb"
+#define FDTFILE_PINE64_STAR64 \
+	"starfive/jh7110-pine64-star64.dtb"
 
 /* enable U74-mc hart1~hart4 prefetcher */
 static void enable_prefetcher(void)
@@ -87,6 +89,8 @@
 			fdtfile = FDTFILE_VISIONFIVE2_1_3B;
 			break;
 		}
+	} else if (!strncmp(product_id, "STAR64", 6)) {
+		fdtfile = FDTFILE_PINE64_STAR64;
 	} else {
 		log_err("Unknown product\n");
 		return;
diff --git a/board/theobroma-systems/jaguar_rk3588/MAINTAINERS b/board/theobroma-systems/jaguar_rk3588/MAINTAINERS
index 28fae4b..ab7051b 100644
--- a/board/theobroma-systems/jaguar_rk3588/MAINTAINERS
+++ b/board/theobroma-systems/jaguar_rk3588/MAINTAINERS
@@ -1,6 +1,6 @@
 JAGUAR-RK3588 (SBC-RK3588-AMR Single Board Computer)
-M:	Klaus Goger <klaus.goger@theobroma-systems.com>
-M:	Quentin Schulz <quentin.schulz@theobroma-systems.com>
+M:	Klaus Goger <klaus.goger@cherry.de>
+M:	Quentin Schulz <quentin.schulz@cherry.de>
 M:	Heiko Stuebner <heiko.stuebner@cherry.de>
 S:	Maintained
 F:	board/theobroma-systems/jaguar_rk3588
@@ -9,5 +9,5 @@
 F:	include/configs/jaguar_rk3588.h
 F:	arch/arm/dts/rk3588-jaguar*
 F:	configs/jaguar-rk3588_defconfig
-W:	https://theobroma-systems.com/product/jaguar-sbc-rk3588/
-T:	git git://git.theobroma-systems.com/jaguar-u-boot.git
+W:	https://embedded.cherry.de/product/jaguar-sbc-rk3588/
+T:	git git://git.embedded.cherry.de/jaguar-u-boot.git
diff --git a/board/theobroma-systems/lion_rk3368/MAINTAINERS b/board/theobroma-systems/lion_rk3368/MAINTAINERS
index a5b4cb3..ed35fee 100644
--- a/board/theobroma-systems/lion_rk3368/MAINTAINERS
+++ b/board/theobroma-systems/lion_rk3368/MAINTAINERS
@@ -1,6 +1,6 @@
 LION-RK3368 (RK3368-uQ7 system-on-module)
-M:	Quentin Schulz <quentin.schulz@theobroma-systems.com>
-M:	Klaus Goger <klaus.goger@theobroma-systems.com>
+M:	Quentin Schulz <quentin.schulz@cherry.de>
+M:	Klaus Goger <klaus.goger@cherry.de>
 S:	Maintained
 F:	board/theobroma-systems/lion_rk3368
 F:	include/configs/lion_rk3368.h
diff --git a/board/theobroma-systems/puma_rk3399/MAINTAINERS b/board/theobroma-systems/puma_rk3399/MAINTAINERS
index 7e84a5b..2536e34 100644
--- a/board/theobroma-systems/puma_rk3399/MAINTAINERS
+++ b/board/theobroma-systems/puma_rk3399/MAINTAINERS
@@ -1,6 +1,6 @@
 PUMA-RK3399
-M:	Quentin Schulz <quentin.schulz@theobroma-systems.com>
-M:	Klaus Goger <klaus.goger@theobroma-systems.com>
+M:	Quentin Schulz <quentin.schulz@cherry.de>
+M:	Klaus Goger <klaus.goger@cherry.de>
 S:	Maintained
 F:	board/theobroma-systems/puma_rk3399
 F:	board/theobroma-systems/common
@@ -8,5 +8,5 @@
 F:	include/configs/puma_rk3399.h
 F:	arch/arm/dts/rk3399-puma*
 F:	configs/puma-rk3399_defconfig
-W:	https://www.theobroma-systems.com/rk3399-q7/tech-specs
-T:	git git://git.theobroma-systems.com/puma-u-boot.git
+W:	https://embedded.cherry.de/product/puma-som-rk3399-q7/
+T:	git git://git.embedded.cherry.de/puma-u-boot.git
diff --git a/board/theobroma-systems/ringneck_px30/MAINTAINERS b/board/theobroma-systems/ringneck_px30/MAINTAINERS
index 97baf334..2aff91f 100644
--- a/board/theobroma-systems/ringneck_px30/MAINTAINERS
+++ b/board/theobroma-systems/ringneck_px30/MAINTAINERS
@@ -1,6 +1,6 @@
 RINGNECK-PX30
-M:	Quentin Schulz <quentin.schulz@theobroma-systems.com>
-M:	Klaus Goger <klaus.goger@theobroma-systems.com>
+M:	Quentin Schulz <quentin.schulz@cherry.de>
+M:	Klaus Goger <klaus.goger@cherry.de>
 S:	Maintained
 F:	board/theobroma-systems/ringneck_px30
 F:	board/theobroma-systems/common
@@ -8,4 +8,5 @@
 F:	include/configs/ringneck_px30.h
 F:	arch/arm/dts/px30-ringneck*
 F:	configs/ringneck-px30_defconfig
-W:	https://theobroma-systems.com/product/ringneck-som-px30-uq7/
+W:	https://embedded.cherry.de/product/ringneck-som-px30-uq7/
+T:	git git://git.embedded.cherry.de/ringneck-u-boot.git
diff --git a/board/toradex/apalis-imx8/MAINTAINERS b/board/toradex/apalis-imx8/MAINTAINERS
index 198399c..761034a 100644
--- a/board/toradex/apalis-imx8/MAINTAINERS
+++ b/board/toradex/apalis-imx8/MAINTAINERS
@@ -1,5 +1,5 @@
 Apalis iMX8
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	http://developer.toradex.com/software/linux/linux-software
 S:	Maintained
 F:	arch/arm/dts/fsl-imx8qm-apalis.dts
diff --git a/board/toradex/apalis-tk1/MAINTAINERS b/board/toradex/apalis-tk1/MAINTAINERS
index e2c6f63..393c8dc 100644
--- a/board/toradex/apalis-tk1/MAINTAINERS
+++ b/board/toradex/apalis-tk1/MAINTAINERS
@@ -1,5 +1,5 @@
 Apalis TK1
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 S:	Maintained
 F:	board/toradex/apalis-tk1/
 F:	board/toradex/common/
diff --git a/board/toradex/apalis_imx6/MAINTAINERS b/board/toradex/apalis_imx6/MAINTAINERS
index 0b2907b..d84527c 100644
--- a/board/toradex/apalis_imx6/MAINTAINERS
+++ b/board/toradex/apalis_imx6/MAINTAINERS
@@ -1,5 +1,5 @@
 Apalis iMX6
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	http://developer.toradex.com/software/linux/linux-software
 W:      https://www.toradex.com/community
 S:	Maintained
diff --git a/board/toradex/apalis_t30/MAINTAINERS b/board/toradex/apalis_t30/MAINTAINERS
index 097db7d..368decf 100644
--- a/board/toradex/apalis_t30/MAINTAINERS
+++ b/board/toradex/apalis_t30/MAINTAINERS
@@ -1,5 +1,5 @@
 Apalis T30
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 S:	Maintained
 F:	board/toradex/apalis_t30/
 F:	board/toradex/common/
diff --git a/board/toradex/colibri-imx6ull/MAINTAINERS b/board/toradex/colibri-imx6ull/MAINTAINERS
index ee6fe6c..6c93e35 100644
--- a/board/toradex/colibri-imx6ull/MAINTAINERS
+++ b/board/toradex/colibri-imx6ull/MAINTAINERS
@@ -1,5 +1,5 @@
 Colibri iMX6ULL
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	http://developer.toradex.com/software/linux/linux-software
 W:	https://www.toradex.com/community
 S:	Maintained
diff --git a/board/toradex/colibri-imx8x/MAINTAINERS b/board/toradex/colibri-imx8x/MAINTAINERS
index 8c9bf1f..938c2ca 100644
--- a/board/toradex/colibri-imx8x/MAINTAINERS
+++ b/board/toradex/colibri-imx8x/MAINTAINERS
@@ -1,5 +1,5 @@
 Colibri iMX8X
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	http://developer.toradex.com/software/linux/linux-software
 S:	Maintained
 F:	arch/arm/dts/fsl-imx8x-colibri.dts
diff --git a/board/toradex/colibri_imx6/MAINTAINERS b/board/toradex/colibri_imx6/MAINTAINERS
index 25d3a06..c106750 100644
--- a/board/toradex/colibri_imx6/MAINTAINERS
+++ b/board/toradex/colibri_imx6/MAINTAINERS
@@ -1,5 +1,5 @@
 Colibri iMX6
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	http://developer.toradex.com/software/linux/linux-software
 W:      https://www.toradex.com/community
 S:	Maintained
diff --git a/board/toradex/colibri_imx7/MAINTAINERS b/board/toradex/colibri_imx7/MAINTAINERS
index e4583d5..80770cc 100644
--- a/board/toradex/colibri_imx7/MAINTAINERS
+++ b/board/toradex/colibri_imx7/MAINTAINERS
@@ -1,5 +1,5 @@
 Colibri iMX7
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	http://developer.toradex.com/software/linux/linux-software
 W:	https://www.toradex.com/community
 S:	Maintained
diff --git a/board/toradex/colibri_t20/MAINTAINERS b/board/toradex/colibri_t20/MAINTAINERS
index d0c5b11..5884243 100644
--- a/board/toradex/colibri_t20/MAINTAINERS
+++ b/board/toradex/colibri_t20/MAINTAINERS
@@ -1,5 +1,5 @@
 COLIBRI_T20
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 S:	Maintained
 F:	board/toradex/colibri_t20/
 F:	board/toradex/common/
diff --git a/board/toradex/colibri_t30/MAINTAINERS b/board/toradex/colibri_t30/MAINTAINERS
index 006a0e5..73859fd 100644
--- a/board/toradex/colibri_t30/MAINTAINERS
+++ b/board/toradex/colibri_t30/MAINTAINERS
@@ -1,5 +1,5 @@
 Colibri T30
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 S:	Maintained
 F:	board/toradex/colibri_t30/
 F:	board/toradex/common/
diff --git a/board/toradex/colibri_vf/MAINTAINERS b/board/toradex/colibri_vf/MAINTAINERS
index 2e1a74c..a41bd16 100644
--- a/board/toradex/colibri_vf/MAINTAINERS
+++ b/board/toradex/colibri_vf/MAINTAINERS
@@ -1,5 +1,5 @@
 Colibri VFxx
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	http://developer.toradex.com/software/linux/linux-software
 W:	https://www.toradex.com/community
 S:	Maintained
diff --git a/board/toradex/verdin-am62/MAINTAINERS b/board/toradex/verdin-am62/MAINTAINERS
index 3e30d1d..3f69ea8 100644
--- a/board/toradex/verdin-am62/MAINTAINERS
+++ b/board/toradex/verdin-am62/MAINTAINERS
@@ -8,6 +8,6 @@
 F:	configs/verdin-am62_r5_defconfig
 F:	doc/board/toradex/verdin-am62.rst
 F:	include/configs/verdin-am62.h
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 S:	Maintained
 W:	https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am-62
diff --git a/board/toradex/verdin-imx8mm/MAINTAINERS b/board/toradex/verdin-imx8mm/MAINTAINERS
index d567f0e..0d58a73 100644
--- a/board/toradex/verdin-imx8mm/MAINTAINERS
+++ b/board/toradex/verdin-imx8mm/MAINTAINERS
@@ -1,5 +1,5 @@
 Verdin iMX8M Mini
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 W:	https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini
 S:	Maintained
 F:	arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi
diff --git a/board/toradex/verdin-imx8mp/MAINTAINERS b/board/toradex/verdin-imx8mp/MAINTAINERS
index 9fe76d8..a683448 100644
--- a/board/toradex/verdin-imx8mp/MAINTAINERS
+++ b/board/toradex/verdin-imx8mp/MAINTAINERS
@@ -5,6 +5,6 @@
 F:	configs/verdin-imx8mp_defconfig
 F:	doc/board/toradex/verdin-imx8mp.rst
 F:	include/configs/verdin-imx8mp.h
-M:	Marcel Ziswiler <marcel.ziswiler@toradex.com>
+M:	Francesco Dolcini <francesco.dolcini@toradex.com>
 S:	Maintained
 W:	https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 261f71a..87fd279 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -1,15 +1,18 @@
 CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
 CONFIG_ENV_SIZE=0x8000
-CONFIG_DEFAULT_DEVICE_TREE="omap3-igep0020"
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/omap3-igep0020"
 CONFIG_SPL_TEXT_BASE=0x40200000
 CONFIG_TARGET_OMAP3_IGEP00X0=y
 CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
@@ -39,16 +42,7 @@
 CONFIG_SPL_UBI_INFO_ADDR=0x88080000
 CONFIG_SPL_UBI_VOL_IDS=8
 CONFIG_SPL_UBI_LOAD_MONITOR_ID=0
-CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
-CONFIG_SPL_UBI_LOAD_ARGS_ID=4
 CONFIG_SPL_ONENAND_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000
-CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
-CONFIG_SPL_FALCON_BOOT_MMCSD=y
-CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
-CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
 CONFIG_CMD_SPL=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_ONENAND=y
@@ -58,7 +52,12 @@
 CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
 # CONFIG_CMD_UBIFS is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
+CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_UBI=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
@@ -68,6 +67,7 @@
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_NET is not set
+CONFIG_SPL_DM=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MMC_OMAP_HS=y
@@ -80,8 +80,6 @@
 CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_CONS_INDEX=3
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
 CONFIG_BCH=y
diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig
index 4aabb1f..234c965 100644
--- a/configs/rzg2_beacon_defconfig
+++ b/configs/rzg2_beacon_defconfig
@@ -3,7 +3,8 @@
 CONFIG_TEXT_BASE=0x50000000
 CONFIG_SYS_MALLOC_LEN=0x4000000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ENV_OFFSET=0x0
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-beacon-rzg2m-kit"
 CONFIG_RCAR_GEN3=y
diff --git a/doc/board/starfive/index.rst b/doc/board/starfive/index.rst
index d369b98..72ab6dd 100644
--- a/doc/board/starfive/index.rst
+++ b/doc/board/starfive/index.rst
@@ -8,4 +8,5 @@
 
    milk-v_mars
    milk-v_mars_cm
+   pine64_star64
    visionfive2
diff --git a/doc/board/starfive/pine64_star64.rst b/doc/board/starfive/pine64_star64.rst
new file mode 100644
index 0000000..52e9a90
--- /dev/null
+++ b/doc/board/starfive/pine64_star64.rst
@@ -0,0 +1,201 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Pine64 Star64
+=============
+
+U-Boot for the Star64 uses the same U-Boot binaries as the VisionFive 2 board.
+In U-Boot SPL the actual board is detected and the device-tree patched
+accordingly.
+
+Building
+~~~~~~~~
+
+1. Add the RISC-V toolchain to your PATH.
+2. Setup ARCH & cross compilation environment variable:
+
+.. code-block:: none
+
+   export CROSS_COMPILE=<riscv64 toolchain prefix>
+
+The M-mode software OpenSBI provides the supervisor binary interface (SBI) and
+is responsible for the switch to S-Mode. It is a prerequisite to build U-Boot.
+Support for the JH7110 was introduced in OpenSBI 1.2. It is recommended to use
+a current release.
+
+.. code-block:: console
+
+	git clone https://github.com/riscv/opensbi.git
+	cd opensbi
+	make PLATFORM=generic FW_TEXT_START=0x40000000
+
+Now build the U-Boot SPL and U-Boot proper.
+
+.. code-block:: console
+
+	cd <U-Boot-dir>
+	make starfive_visionfive2_defconfig
+	make OPENSBI=$(opensbi_dir)/build/platform/generic/firmware/fw_dynamic.bin
+
+This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
+as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
+
+Device-tree selection
+~~~~~~~~~~~~~~~~~~~~~
+
+U-Boot will set variable $fdtfile to starfive/jh7110-pine64-star64.dtb.
+
+To overrule this selection the variable can be set manually and saved in the
+environment
+
+::
+
+    env set fdtfile my_device-tree.dtb
+    env save
+
+or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
+provide a default value.
+
+Boot source selection
+~~~~~~~~~~~~~~~~~~~~~
+
+Boot mode is selected by an MSEL-DIP marked S1804 and GPIO_0 position adjacent
+to the 40pin GPIO header. ON/ONKE and number markings of the MSEL-DIP are
+misleading; Instead refer to the ``L`` (0) and ``H`` (1) silkscreen for
+accurate selection.
+
++ (QSPI) Flash: 00
++ SD: 01
++ EMMC: 10
++ UART: 11
+
+Preparing the SD-Card
+~~~~~~~~~~~~~~~~~~~~~
+
+The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the
+partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free
+to choose any partition number.
+
+With the default configuration U-Boot SPL loads the U-Boot FIT image
+(u-boot.itb) from partition 2 (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2).
+When formatting it is recommended to use GUID
+BC13C2FF-59E6-4262-A352-B275FD6F7172 for this partition.
+
+The FIT image (u-boot.itb) is a combination of OpenSBI's fw_dynamic.bin,
+u-boot-nodtb.bin and the device tree blob.
+
+Format the SD card (make sure the disk has GPT, otherwise use gdisk to switch)
+
+.. code-block:: bash
+
+	sudo sgdisk --clear \
+	  --set-alignment=2 \
+	  --new=1:4096:8191 --change-name=1:spl --typecode=1:2E54B353-1271-4842-806F-E436D6AF6985\
+	  --new=2:8192:16383 --change-name=2:uboot --typecode=2:BC13C2FF-59E6-4262-A352-B275FD6F7172  \
+	  --new=3:16384:1654784 --change-name=3:system --typecode=3:EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 \
+	  /dev/sdb
+
+Copy U-Boot to the SD card
+
+.. code-block:: bash
+
+	sudo dd if=u-boot-spl.bin.normal.out of=/dev/sdb1
+	sudo dd if=u-boot.itb of=/dev/sdb2
+
+	sudo mount /dev/sdb3 /mnt/
+	sudo cp u-boot-spl.bin.normal.out /mnt/
+	sudo cp u-boot.itb /mnt/
+	sudo cp Image.gz /mnt/
+	sudo cp initramfs.cpio.gz /mnt/
+	sudo cp jh7110-starfive-visionfive-2.dtb /mnt/
+	sudo umount /mnt
+
+Booting
+~~~~~~~
+
+Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+
+Serial Number and MAC address issues
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+U-Boot requires valid EEPROM data to determine which board-specific fix-up to
+apply at runtime. This affects the size of memory initialized, network mac
+address numbering, and tuning of the network PHYs.
+
+The Star64 does not currently ship with unique serial numbers per-device.
+Devices follow a pattern where the last mac address bytes are a sum of 0x7558
+and the serial number (lower port mac0), or a sum of 0x7559 and the serial
+number (upper port mac1).
+
+As tested there are several 4gb model units where the serial number and network
+mac addresses collide with other devices (serial
+``STAR64V1-2310-D004E000-00000005``, MACs ``6c:cf:39:00:75:61``,
+``6c:cf:39:00:75:62``)
+
+Some early Star64 boards shipped with an uninitialized EEPROM and no write
+protect pull-up resistor in place. Later units of all 4gb and 8gb models
+sharing the same serial number in EEPROM data will have this problem that the
+network mac addresses are alike between different models and this may be
+corrected by defeating the write protect resistor to write new values. As an
+alternative to this, it may be worked around by overriding the mac addresses
+via U-Boot environment variables.
+
+It is required for any unit having uninitialized EEPROM and recommended for
+all later Star64 4gb model units (not properly serialized) to have decided on a
+new 6-byte serial number. This serial number should be high enough to
+avoid collision with other JH7110 boards and low enough not to overflow i.e.
+between ``cafe00`` and ``f00d00``.
+
+Update EEPROM values
+^^^^^^^^^^^^^^^^^^^^
+
+1. Prepare EEPROM data in memory
+
+::
+
+	## When there is no error to load existing data:
+	mac read_eeprom
+
+	## When there is an error to load non-existing data:
+	# "DRAM:  Not a StarFive EEPROM data format - magic error"
+	mac initialize
+
+2. Set Star64 values
+
+::
+
+	## Common values
+	mac vendor PINE64
+	mac pcb_revision c1
+	mac bom_revision A
+
+	## Device-specific values
+	# Year 2023 week 10 production date, 8GB DRAM, optional eMMC, serial cdef01
+	mac product_id STAR64V1-2310-D008E000-00cdef01
+
+	# Last three bytes mac0: 0x7558 + serial number 0xcdef01
+	mac mac0_address 6c:cf:39:ce:64:59
+
+	# Last three bytes mac1: 0x7559 + serial number 0xcdef01
+	mac mac1_address 6c:cf:39:ce:64:5a
+
+3. Defeat write-protect pull-up resistor (if installed) and write to EEPROM
+
+::
+
+	mac write_eeprom
+
+Set Variables in U-Boot
+^^^^^^^^^^^^^^^^^^^^^^^
+
+.. note:: Changing just the serial number will not alter your MAC address
+
+The MAC addresses may be "set" as follows by writing as a custom config to SPI
+(Change the last 3 bytes of MAC addreses as appropriate):
+
+::
+
+	env set serial# STAR64V1-2310-D008E000-00cdef01
+	env set ethaddr 6c:cf:39:ce:64:59
+	env set eth1addr 6c:cf:39:ce:64:5a
+	env save
+	reset
diff --git a/drivers/cache/cache-andes-l2.c b/drivers/cache/cache-andes-l2.c
index 45d29f2..bc6f7ed 100644
--- a/drivers/cache/cache-andes-l2.c
+++ b/drivers/cache/cache-andes-l2.c
@@ -30,7 +30,7 @@
 	volatile u64	cctl_command2;
 	volatile u64	cctl_access_line2;
 	volatile u64	cctl_command3;
-	volatile u64	cctl_access_line4;
+	volatile u64	cctl_access_line3;
 	volatile u64	cctl_status;
 };
 
@@ -97,13 +97,15 @@
 	struct andes_l2_plat *plat = dev_get_plat(dev);
 	volatile struct l2cache *regs = plat->regs;
 	u8 hart = gd->arch.boot_hart;
+
 	void __iomem *cctlcmd = (void __iomem *)CCTL_CMD_REG(regs, hart);
+	void __iomem *cctlstatus = (void __iomem *)CCTL_STATUS_REG(regs, hart);
 
 	if ((regs) && (readl(&regs->control) & L2_ENABLE)) {
 		writel(L2_WBINVAL_ALL, cctlcmd);
 
-		while ((readl(&regs->cctl_status) & CCTL_STATUS_MSK(hart))) {
-			if ((readl(&regs->cctl_status) & CCTL_STATUS_ILLEGAL(hart))) {
+		while ((readl(cctlstatus) & CCTL_STATUS_MSK(hart))) {
+			if ((readl(cctlstatus) & CCTL_STATUS_ILLEGAL(hart))) {
 				printf("L2 flush illegal! hanging...");
 				hang();
 			}
diff --git a/dts/upstream/src/arm64/Makefile b/dts/upstream/src/arm64/Makefile
index 9a8f6aa..26a83d3 100644
--- a/dts/upstream/src/arm64/Makefile
+++ b/dts/upstream/src/arm64/Makefile
@@ -7,6 +7,10 @@
 # Add any required device tree compiler flags here
 DTC_FLAGS += -a 0x8
 
+ifdef CONFIG_RCAR_64
+DTC_FLAGS += -R 4 -p 0x1000
+endif
+
 PHONY += dtbs
 dtbs: $(addprefix $(obj)/, $(dtb-y))
 	@: